• Home
  • |
  • Click Value on a scope

Are you struggling to understand the concept and importance of click value on your rifle scope? Click value is a key factor that influences bullet impact, translating to either your triumphant hit or regrettable miss.

This article will serve as your guide, demystifying everything about ‘click values’ and giving you practical tips for applying these adjustments accurately. Intrigued? Welcome aboard – let’s hit the bullseye with precision!

Key Takeaways

  • Click value on a scope refers to the amount of movement in bullet impact that occurs with each adjustment of the knob.
  • Understanding and accurately calculating scope clicks is essential for achieving precision in shooting.
  • Minute of angle (MOA) is a unit used to make adjustments on a scope, allowing shooters to account for factors like windage and elevation corrections.
  • Using the correct click value and understanding MOA measurements can greatly enhance shooting accuracy.

Understanding Click Value on a Scope

To understand click value on a scope, you need to know how to calculate it and its significance in precision shooting.

How to calculate scope clicks

Understanding the calculation of scope clicks is crucial for any proficient hunter or shooter aiming to achieve precision. It commences with grasping that one click on your rifle scope usually adjusts the bullet’s point of impact by 1/4 inch at 100 yards – this is also referred to as a quarter-MOA adjustment.

This implies that four clicks would move the bullet’s impact point by approximately one inch at the same distance. With distances beyond 100 yards, you will have to consider both windage and elevation adjustments, taking into account how far your target is and which direction it is moving towards.

To further aid in accurate calculations, there are scope click calculators available online making the process significantly easier for shooters who need an instant solution while on-field or during their optics trade sessions.

Ultimately, understanding how to calculate scope clicks can help ensure each shot hits its intended target accurately and effectively.

Scope click values and their significance

Understanding scope click values is crucial for hunters and shooters when it comes to precision shooting. The click value on a scope refers to the amount of movement in bullet impact that occurs with each adjustment of the knob.

This is represented by a specific measurement, such as minutes of angle (MOA). Knowing the true click values of a scope allows you to make accurate adjustments for windage and elevation.

For example, if your scope has quarter-MOA clicks, each click will move the bullet impact approximately 1/4 inch at 100 yards. This level of precision can make all the difference when aiming at targets over long distances.

By understanding how many clicks are needed to compensate for different variables like wind or changes in distance, you can ensure that your shots hit their mark consistently.

To determine a scope’s true click values, one common method is performing the tall target test. This involves setting up a target at a known distance and adjusting your scope based on its current settings.

By measuring how much the bullet impacts move with every click adjustment, you can confirm whether your scope’s stated click values align with reality.

How to adjust a scope

To adjust a scope for precise shooting, there are a few important steps to follow. First, it’s crucial to understand the true click values of your scope. This refers to how much the impact of your bullet moves on the target with each adjustment dial click.

To verify these values, you can perform a tall target test, which helps ensure accuracy in applying ballistic solutions.

Once you know your scope’s click values, adjusting it becomes easier. Most scopes have turrets that allow for windage and elevation corrections. These turrets act as translators for shooters, enabling them to make precise adjustments based on their desired point-of-impact changes.

To make adjustments properly, use minutes of angle (MOA). One MOA is approximately 1.047 inches at 100 yards. By calculating the number of MOAs needed for correction and converting them into clicks using your scope’s true click values, you can achieve more accurate results.

It’s also worth noting that there are helpful tools available like scope click calculators that simplify this process by providing the exact number of clicks required for adjustment.

Tips for Using Click Value on a Scope

To ensure accurate shooting, use the correct click value when adjusting your scope. Understanding minute of angle (MOA) is crucial for sight adjustments using minutes of angle (MOA).

Using the correct click value for accurate shooting

To ensure accurate shooting, it is crucial to use the correct click value on a scope. The click value refers to how much the impact of your bullet moves on the target with each knob adjustment.

By understanding and correctly applying this value, you can make precise adjustments to account for factors such as windage and elevation.

Knowing the true click values of your scope is essential for accuracy. While spec-sheets may indicate quarter-MOA (Minute of Angle) clicks, it’s important to verify these values through methods like the tall target test.

This ensures that when you make adjustments based on those clicks, your bullets will actually hit where you intend them to.

Once you know your scope’s true click values, using them for accurate shooting becomes straightforward. You can easily calculate the number of clicks needed to adjust for specific distances or environmental conditions using online scope click calculators.

These tools simplify the process and help ensure precision in adjusting for bullet impact.

By mastering the correct use of click values on a scope, hunters and shooters can greatly enhance their overall shooting capabilities. Whether it’s making precise windage or elevation corrections or focusing their rifle scopes effectively, understanding and utilizing accurate click values is key to hitting targets consistently at different ranges.

Understanding minute of angle (MOA)

Minute of angle (MOA) is a crucial concept in precision shooting that every hunter and shooter should understand. Put simply, MOA refers to the angular measurement used to make adjustments on your scope.

It’s a way of quantifying the movement of bullet impact on the target.

To give you an idea, one MOA equates to about 1.047 inches at 100 yards. With this knowledge, you can easily calculate how much adjustment is needed for different distances. For example, if you need to move your shot three inches to the right at 200 yards, you would adjust your scope by approximately three MOA.

By understanding minute of angle (MOA), you gain greater control over your rifle’s precision shooting capabilities. It allows for more accurate adjustments when accounting for factors such as windage and elevation corrections.

Sight adjustments using minutes of angle (MOA)

To make accurate sight adjustments on a scope, hunters and shooters often rely on minutes of angle (MOA) measurements. MOA is a unit that helps determine how much the bullet impact will move when adjusting the scope’s dials.

One MOA is equivalent to 1.047 inches at 100 yards, providing a precise reference for making corrections. By understanding MOA calculations, hunters can fine-tune their rifle scopes with confidence, ensuring their shots hit the mark consistently.

The ability to make windage and elevation corrections using MOA translates into improved accuracy and increased success in precision shooting situations. So next time you head out for your hunting or shooting adventure, remember to utilize seconds of angle (MOA) adjustments to enhance your overall performance.


In conclusion, understanding the click value on a scope is crucial for precision shooting. By accurately calculating scope clicks and adjusting accordingly, hunters and shooters can improve their accuracy on target.

Remember to use the correct click value and familiarize yourself with minute of angle (MOA) measurements for precise sight adjustments. With this knowledge, you’ll be able to make confident shots and hit your target with confidence every time.

Happy shooting!


1. What is click value on a scope?

Click value refers to the amount of adjustment needed for each click on the scope’s windage and elevation turrets to move the point of impact at a given distance.

2. How can I determine the click value on my scope?

To determine the click value on your scope, you can conduct a simple test by shooting a group at a known distance and measuring how far off center it is. Then, make adjustments using the turret knobs and count how many clicks are needed to bring the point of impact back to center. Divide the total adjustment made by the number of clicks used, and that will give you your click value.

3. Why is knowing the click value important for accuracy in shooting?

Knowing the click value is important for accuracy because it allows you to make precise adjustments when zeroing your scope or compensating for bullet drop or windage. Without knowing this information, you may struggle to consistently hit targets at different distances or under varying environmental conditions.

4. Can I change or adjust my scope’s click value?

No, you cannot change or adjust your scope’s click value as it is set by the manufacturer during production. However, some higher-end scopes may have interchangeable turrets with different values available for purchase separately if needed in specific shooting situations.

George Grey

About the author

Being an avid outdoorsman since I can remember, my passion for survival, hunting and the outdoors has grown every year. I love being out in the country and living off it whenever time allows. Huge Rifle Scopes aficionado!

George Grey